SW 70+35 High Speed Wire Insulation Line
Parameters
| Process materials | XLPE | LSZH | PVC | |||||||||||
| Line speed | 0～350m/min（1.0mm² —350m/min） | |||||||||||||
| Screw rotate speed | 0～120r/min | |||||||||||||
| Maximum extruding capacity | PVC:200kg/h | |||||||||||||
| Size | Conductor OD | Thickness
mm |
Finished OD
mm |
XLPE
SPEED |
LSZH
SPEED |
PVC
SPEED |
||||||||
| 0.5mm2/0.8 | 0.8 | 0.4 | 1.9-2.3 | – | – | 350m/min | ||||||||
| 0.75mm2/0.97 | 0.97 | 0.4 | 2.1-2.5 | – | – | 350m/min | ||||||||
| 1.0mm2/1.13 | 1.13 | 0.4 | 2.2-2.7 | – | – | 350m/min | ||||||||
| 1.5mm2/1.38 | 1.38 | 0.6 | 2.6-3.2 | – | – | 320m/min | ||||||||
| 2.5mm2/1.78 | 1.78 | 0.6 | 3.2-3.9 | – | – | 240m/min | ||||||||
| 2.5mm2/19×0.41 | 1.78 | 0.6 | 4.2 | – | – | 238m/min | ||||||||
| 4.0mm2/2.25 | 2.25 | 0.8 | 3.6-4.4 | – | – | 152m/min | ||||||||
| 4.0mm2/19×0.52 | 2.25 | 0.8 | 4.8 | – | – | 150m/min | ||||||||
| 6.0mm2/2.76 | 2.76 | 0.8 | 4.1-5.0 | – | – | 130m/min | ||||||||
| 6.0mm2/19×0.64 | 2.76 | 0.8 | 5.6 | – | – | 130m/min | ||||||||
| 10mm²/7*1.35 | 3.56 | 0.8 | 5.6-6.7 | – | – | 80m/min | ||||||||
| 10mm²/84*0.4 | 3.56 | 0.8 | 7.6 | – | – | 80m/min | ||||||||
| Max output | 1 screw for 70 | 150kg | 120kg | 150kg | ||||||||||
| 1 screw for 30 | 20kg | 16kg | 20kg | |||||||||||
| Motor Power | 37/45 | 45 | 37/45 | |||||||||||
| Conductor size range | compacted & flexible copper conductor Min 0.5mm² to max 10mm² for insulation process, Input Dia. (mm) 0.8-3.56 | |||||||||||||
| Cross section area(mm2) | 0.5-10 | Crosshead size | U14 | |||||||||||
| Finished cable diameter | 0.5mm² to 10mm² (single round core)
Output Dia.(mm) 1.9-7.6 |
|||||||||||||
| Applicable cable type | Insulation & jacketing | |||||||||||||
| Axis cable height | 1000mm | |||||||||||||
| Voltage | 3 phase -5 wires. AC380/415V (±10%),-50/60HZ, according to customer’s standard. | |||||||||||||