SW 70+ 45 High Speed Wire Insulation Line
Parameters
| Process materials | XLPE | LSZH | PVC | |||||||||
| Line speed | 0～350m/min（1.0mm² —350m/min） | |||||||||||
| Screw rotate speed | 0～120r/min | |||||||||||
| Maximum extruding capacity | PVC:200kg/h | |||||||||||
| Size | Conductor OD | Thickness mm | Finished OD |
XLPE
SPEED |
LSZH SPEED |
PVC SPEED |
||||||
| 0.5mm2/0.8 | 0.8 | 0.4 | 1.9-2.3 | – | – | 350m/min | ||||||
| 0.75mm2/0.8 | 0.97 | 0.4 | 2.1-2.5 | – | – | 350m/min | ||||||
| 1.0mm2/1.13 | 1.13 | 0.4 | 2.2-2.7 | – | – | 350m/min | ||||||
| 1.5mm2/1.38 | 1.38 | 0.6 | 2.6-3.2 | – | – | 320m/min | ||||||
| 2.5mm2/1.78 | 1.78 | 0.6 | 3.2-3.9 | – | – | 240m/min | ||||||
| 2.5mm2/19×0.41 | 1.78 | 0.6 | 4.2 | – | – | 238m/min | ||||||
| 4.0mm2/2.25 | 2.25 | 0.8 | 3.6-4.4 | – | – | 152m/min | ||||||
| 4.0mm2/19×0.52 | 2.25 | 0.8 | 4.8 | – | – | 150m/min | ||||||
| 6.0mm2/2.76 | 2.76 | 0.8 | 4.1-5.0 | – | – | 120m/min | ||||||
| 6.0mm2/19×0.64 | 2.76 | 0.8 | 5.6 | – | – | 120m/min | ||||||
| 10mm2/7*1.35 | 3.56 | 0.8 | 5.6-6.7 | – | – | 80m/min | ||||||
| 10mm2/84*0.4 | 3.56 | 0.8 | 7.6 | – | – | 80m/min | ||||||
| Max output | 1 screw for 70 | 150kg | 120kg | 200kg | ||||||||
| 1 screw for 45 | 30kg | 25kg | 50kg | |||||||||
| Motor Power | – | 30 | 37 | 30 | ||||||||
| Conductor size range | compacted & flexible copper conductor Min 0.5mm² to max 10mm² for insulation process, Input Dia. (mm) 0.8-3.56 | |||||||||||
| Cross section area(mm2) | 0.5-10 | Crosshead size | U14 | |||||||||
| Finished cable diameter | 0.5mm² to 10mm² (single round core)
Output Dia.(mm) 1.9-7.6 |
|||||||||||
| Applicable cable type | Insulation & jacketing | |||||||||||
| Axis cable height | 1000mm | |||||||||||
| Voltage | 3 phase -5 wires. AC380/415V (±10%),-50/60HZ, according to customer’s standard. | |||||||||||