SW-630 PLC Cantilever Type Single Twist Cabling Line
- PLC signal transmission
- The space is very small
- Ultra short cable channel
- Automatic refueling lubrication system
- Automatic bearing temperature sensing system
- Energy saving of variable frequency motor 20%
- The whole machine adopts individual motor control
- Advanced aerodynamic design
- Variable frequency motor and control system
- NSK bearing, high tensile strength
- Excavation free foundation and convenient installation
- The smart meter is installed in the control cabinet
Parameters
Application
This machine set is applicable to the high-speed cable forming and twisting of all kinds of power cords, PVC and PE cables, Category 5, 6, and 7 data cables, telecommunication cables, and other special-purpose wires and cables. It can also be used for central taping and side taping.
Main parameters
| Applicable core wire | Ø0.6-Ø4.0mm (flexible insulation wire: 0.50mm²-4.0mm²) (stranded wire: Max. 2.5mm²) |
| Twisting output diameter | MAX. Ø15.0mm |
| Range of cable lay | 20mm-120mm stepless regulation |
| Take-up bobbin diameter | |
| BOBIN | 630 |
| FLANGE SIZE | 630 |
| BARREL SIZE | 315 |
| OVERALL WIDTH | 475mm |
| TRAVERSE RANGE | 415mm |
| BORE SIZE | 127mm |
| LOADING WEIGHT | 500KGS |
| Tape specification | |
| Pore diameter | Ø76mm |
| Tape diameter | Ø400mm |
| Width range | 10mm-30mm |
| Applicable materials | Cotton paper, Nylar tape, Aluminum foil tape, Polyester tape |
| Rotation speed of taping machine | Max. 2500 rpm 2000rpm when production |
| Rotation speed of single-twisting machine | Max. 900rpm ( dynamic balance) 650rpm when production |
| Direction | left, right (“S”, “Z”); can be reversed |